Pipelay Construction Crew
· Pipelay Barge Superintendents – experienced in running all aspects of the pipe laying operations, must have a minimum of five (5) years verifiable in this position. (Code : PBS)
· Pipelay Barge Foremen (Code: PBF)
· Pipelay Barge Anchor Foremen (Code: PBAF)
· Tensioner Technicians (Code: TT)
· Stinger Technicians (Code: ST)
Diving Personnel – (Must be IMCA or ADC Qualified)
· Diving Superintendents (Code: DSUP)
· Diving Supervisors (Code: DS)
· Air Divers (Code: AD)
· Inspection Divers (Code: ID)
· Dive System Technicians – mechanical and electrical (Code: DST)
Survey & Positioning Personnel
· Part Chief (Code: PC)
· Surveyors – Hydrographic (Code: SH)
· Surveyors – Anchor Positioning Systems (Code: SA)
· Data Coordinators (Code: DC)
Offshore Construction Personnel
· Construction Manager (Code: CM)
· Construction Superintendents – Hook-Up & Platform Revamp (Code: CSH)
· Construction Supervisors (Code: CS)
· CITB Scaffolding Inspectors (Code: CITB)
· Field Engineers (Code: FE)
Fabrication Personnel (Senior Positions)
· General Manager – must have held this position for the fabrication of Jackets, Decks and Process Modules (Code: GMF)
· Fabrication Superintendents (Code: FSUP)
· Fabrication Supervisors (Code: FS)
· Fabircation Engineer /Welding (Code: FW-ENG)
Marine Crew
· Pipelay Barge Anchor Handling Tug Captains (Code: PBCAPT)
· Pipelay Barge Anchor Handling Tug Chief Engineers (Code: PBENG)
· Captains (Code: CAPT)
· Chief Engineers (Code: CENG)
Others:
1. PROCESS ENGINEERING (Code: PR-ENG)
Process Engineers must have Hysis hands on experience
2. STRUCTURAL ENGINEER, (Code: SE)
3. MECHANICAL/PIPING ENGINEER, (Code: MPE)
Piping engineers should have hands on Caesar II experience
4. MECHANICAL/PIPING DESIGNER (Code: MPD)
For Piping Designer, experience in PDMS is essential
5. RISK & LOSS PREVENTION ENGINEER, (Code: RLPE)
6. OPERABILITY ENGINEER, (Code: OE)
7. COMMISIONING/ COMPLETION MANAGER, (Code: CM-MGR)
8. COMPLIANCE MANAGER, (Code: CM-MGR)
9. PROCUREMENT LEAD, (Code: PR-LD)
10. QA/QC LEAD ENGINEER, (Code: QC/QA-ENG)
For QA /QC personnel, ASNT level II or equivalent certification is essential. Experience in Steel structures in the Oil & Gas sector is essential preferably offshore.
11. VENDOR INSPECTOR/COORDINAT OR, (Code: VIC)
General Qualifications:
· Should be able to speak good English.
· For Engineers hands on SACS experience is preferred.
· At least have 7 (seven) years experience in oil and gas industry, plus 5(five) years experience for senior position.
If you have the above qualifications, send your application letter, recent photo and Resume/CV to: recruitment@donata.co.id in MS Word format (please limit your file to max 200 KB). Write down the Code in the subject of your e-mail, please stated your Salary Expectation.
A very attractive salary package offered and only short listed candidates will be contacted.
NOTES:
To all candidates:
- Please provide more than 1 phone numbers, and make sure your mobile phone is active, if you are abroad also provide your local number.
- Do not forget to state your year’s experiences, salary expectation, professional certificate(s), your recent Passport and its expiration date.
- All CV must be in ENGLISH!
Best Regards,
Dolfie Sondakh
General Manager
Donata Agung Perkasa, PT.
"We provide the best HR Solution for you!"
www.donata.co.id
No comments:
Post a Comment