We re International Oilfield Services Company, looking immediately for the following position:
• Slickline Operators - Job Code: SO
3 to 5 years experience. Able to supervise Field Operation and all aspects of slickline operations.
• Slickline Senior Assistant - Job Code: SSA
2 to 3 years experience. Assist slickline operator on unit, dress slickline tools, perform rig up operations including operations and maintain slickline equipment.
• Slickline Junior Assistant - Job Code: SJA
1 to 2 years experience. Assist in rig up of slickline equipment, dress slickline tools, assist in maintain slickline equipment.
Requirements:
- Graduated from Diploma D3 degree in Engineering
- Good command in English Ability to work under pressure
- High-energy and enthusiasm
- Witting to be assigned across Indonesia
Expiry date: June 06, 2010
We are seeking for candidates who are committed to a long term career. If you meet the above requirement, website you to send your resume by
Email to: WTS@slb.com
Subject: Slickline - “Job Code”
Before: June 6th, 2010
A dynamic and well funded Oil and Gas Company;
A dynamic and well funded Oil and Gas Company is seeking a talented Legal Counsel to join its Jakarta based operations.
Summary of Role:
Provide expert legal services and advice covering regulations, contracts and interpretations to one or more departments engaged in the oil and gas Industry in Indonesia.
The individual will be a recognized expert and have an in-depth understanding of oil and gas practice gained from fulfilling a similar role in an operating company in Indonesia.
Specific duties:
1. Work closely with officers and top management to advise them on changes in oil and gas laws and regulations, evaluate their impact to the company.
2. Needs to have the ability to give immediate answers from accumulated knowledge and experience without the opportunity to research the law.
3. Prepare initial drafts of legal documents covering tenders, bid contracts and GSA S, as well as having the ability to examine and review all legal documents and contracts for legal proficiency
4. Negotiate and prepare drafts documentation for various company transaction including bid rounds, acquisitions and divestitures.
5. Provides legal advice to several commercial sections of the company and in administrative matters relating to personnel, property leases etc.
Job requirements
• Qualified practicing lawyer / attorney with a good knowledge of legal skills developed through working in the oil and gas industry in Indonesia.
• Have a thorough understanding of the regulations and laws covering terms Production Sharing Contracts.
• Minimum eight (8) - twelve (12) years.
• Have advocate certification
• Fluency In spoken and written English.
• Computer literate is a must
• Be an Indonesian national.
Expiry date: May 31, 2010
Please send your CV to recruitment@poe.co.id. 10 (ten) calendar days, starting May 22, 2010. Only short listed candidate will be contacted.
Summary of Role:
Provide expert legal services and advice covering regulations, contracts and interpretations to one or more departments engaged in the oil and gas Industry in Indonesia.
The individual will be a recognized expert and have an in-depth understanding of oil and gas practice gained from fulfilling a similar role in an operating company in Indonesia.
Specific duties:
1. Work closely with officers and top management to advise them on changes in oil and gas laws and regulations, evaluate their impact to the company.
2. Needs to have the ability to give immediate answers from accumulated knowledge and experience without the opportunity to research the law.
3. Prepare initial drafts of legal documents covering tenders, bid contracts and GSA S, as well as having the ability to examine and review all legal documents and contracts for legal proficiency
4. Negotiate and prepare drafts documentation for various company transaction including bid rounds, acquisitions and divestitures.
5. Provides legal advice to several commercial sections of the company and in administrative matters relating to personnel, property leases etc.
Job requirements
• Qualified practicing lawyer / attorney with a good knowledge of legal skills developed through working in the oil and gas industry in Indonesia.
• Have a thorough understanding of the regulations and laws covering terms Production Sharing Contracts.
• Minimum eight (8) - twelve (12) years.
• Have advocate certification
• Fluency In spoken and written English.
• Computer literate is a must
• Be an Indonesian national.
Expiry date: May 31, 2010
Please send your CV to recruitment@poe.co.id. 10 (ten) calendar days, starting May 22, 2010. Only short listed candidate will be contacted.
PT. Gunanusa Utama Fabricators; 6 positions
Our company was established more than a quarter of a century ago. Today we are a welt established homegrown company with an excellent track record locally and internationally in turkey construction of oil& gas platforms and similar facilities.
We are looking for fresh and experienced professionals to join our team to cater for our growth and expansion including being involved with current contracts outside Indonesia. Fresh graduates (S1) will be offered to loin our comprehensive Management Trainee Programs whilst those with the relevant experience will be assigned to positions commensurate with their respective background.
The candidates we are bolting for must be a graduate of good academic standing from a recognized university with good communication and leadership qualities. A good command of English is an obvious advantage.
Successful candidates must he prepared to travel (including offshore) and be stationed in Cilegon. Kalimantan or anywhere within the Nusantara or abroad.
Our Management Trainee Program shall be for a period of up to one years During this period the Trainees will be exposed to various aspects of company operations.
The company reserves the right to offer permanent or contract positions to candidates whose performance meet the standards set by the company (subject to availability of positions) at end of the training period.
We prefer professionals from the following disciplines:
I. Mechanical Engineering (ME)
II. Civil/Structural Engineering (CE)
III. Electrical and Electronic Engineering (EE)
IV. Materials or Metallurgical Engineering (MTR)
V. Engineering Physics (EP)
VI. Offshore Engineering (OE)
Expiry date: June 29, 2010
Please send a resume including all educational certificates and a passport photograph (non-returnable); stating position applied for ME, CE, EE ect) not later than one (l) 1 week from the date Of this advertisement by email to:
HRD Manager,
PT. GUNANUSA UTAMA FABRICATORS
JI. Bendungan Hilir Raya No.60
Jakarta Pusat. 10210
Email: mt.hrd@gunanusa.co.id
Website: www.gunanusautama.com
We are looking for fresh and experienced professionals to join our team to cater for our growth and expansion including being involved with current contracts outside Indonesia. Fresh graduates (S1) will be offered to loin our comprehensive Management Trainee Programs whilst those with the relevant experience will be assigned to positions commensurate with their respective background.
The candidates we are bolting for must be a graduate of good academic standing from a recognized university with good communication and leadership qualities. A good command of English is an obvious advantage.
Successful candidates must he prepared to travel (including offshore) and be stationed in Cilegon. Kalimantan or anywhere within the Nusantara or abroad.
Our Management Trainee Program shall be for a period of up to one years During this period the Trainees will be exposed to various aspects of company operations.
The company reserves the right to offer permanent or contract positions to candidates whose performance meet the standards set by the company (subject to availability of positions) at end of the training period.
We prefer professionals from the following disciplines:
I. Mechanical Engineering (ME)
II. Civil/Structural Engineering (CE)
III. Electrical and Electronic Engineering (EE)
IV. Materials or Metallurgical Engineering (MTR)
V. Engineering Physics (EP)
VI. Offshore Engineering (OE)
Expiry date: June 29, 2010
Please send a resume including all educational certificates and a passport photograph (non-returnable); stating position applied for ME, CE, EE ect) not later than one (l) 1 week from the date Of this advertisement by email to:
HRD Manager,
PT. GUNANUSA UTAMA FABRICATORS
JI. Bendungan Hilir Raya No.60
Jakarta Pusat. 10210
Email: mt.hrd@gunanusa.co.id
Website: www.gunanusautama.com
Castrol; Procurement Executive
We are a fast growing multinational lubricant company with a highly successful track record. Our performance focus has resulted in a very strong consumer franchise through highly customer oriented distribution.
You have to be a good team player, ambitious, confident, and having proven ability to work with colleagues and ability to adapt to multicultural and multidiscipline working environment. You must also have Bachelor Degree (S1) from reputable university with GPA min. 2.75 with excellent English fluency for the following position:
Procurement Executive (PE)
• Bachelor Degree (S1) in Engineering or Accounting.
• Minimum 4 years experience in Procurement.
• Sound Knowledge in Budget and Accounting is preferred.
• Strong negotiation skills.
• Proficiency of ERP system (JDE, SAP, or Oracle ) and MS office.
• Broad knowledge on packaging market, engineering supplies & services.
• Willing to be stationed in Merak.
Please submit your application and CV, and put the code (PE) in the subject of the e-mail to below address. Only short-listed candidate will be followed up. This application should be received within 10 (ten) days from the date of this advertisement.
Expiry date: June 05, 2010
HR MANAGER, PT CASTROL INDONESIA
Email : castrolindonesiahrd@se1.bp.com
You have to be a good team player, ambitious, confident, and having proven ability to work with colleagues and ability to adapt to multicultural and multidiscipline working environment. You must also have Bachelor Degree (S1) from reputable university with GPA min. 2.75 with excellent English fluency for the following position:
Procurement Executive (PE)
• Bachelor Degree (S1) in Engineering or Accounting.
• Minimum 4 years experience in Procurement.
• Sound Knowledge in Budget and Accounting is preferred.
• Strong negotiation skills.
• Proficiency of ERP system (JDE, SAP, or Oracle ) and MS office.
• Broad knowledge on packaging market, engineering supplies & services.
• Willing to be stationed in Merak.
Please submit your application and CV, and put the code (PE) in the subject of the e-mail to below address. Only short-listed candidate will be followed up. This application should be received within 10 (ten) days from the date of this advertisement.
Expiry date: June 05, 2010
HR MANAGER, PT CASTROL INDONESIA
Email : castrolindonesiahrd@se1.bp.com
PT JGC Indonesia; 4 positions
We are leading Engineering, Procurement and Construction (EPC) Company in Oil & Gas Industry and have been operating in Indonesia for more 30 years. We would like to invite qualified and experience professional who can work as a team with proven competencies in the whole range of development and improvement initiatives to fill the following positions for :
1) QC ENGINEER
• Have minimum experience 6 years as QC inspector/QC Engineer in EPC project,
• Familiar with QC procedure and capable to prepare QC procedures,
• Capable to review Vendor s documents with supervision by checker,
• Capable to communication with client, vendors and subcontractors both verbal and written (draft),
• Have understanding of statulory /government (MIGAS /Depnaker) regulation and certification,
• Capable to coordinate inter-discipline and third parties,
• Capable to conduct Vendor s shop survey,
• Capable to prepare report of NCR for fabrication and construction include solutions for specific equipment,
• Have TOIEC score is preferred.
General Qualification:
• Strong interpersonal skills and organization experience,
• Preferable Fluent in English (writing and speaking),
• Computer literate (MS office, MS Word, Ms Excel, Ms Project and related software,
• Familiar with regulation, code and standard in Oil & gas industry,
• Self – starting and motivated as well as able to work in demanding area,
• Team building mind set.
2) QC INSPECTOR
• Have minimum experience 3 years as Inspector,
• Capable to prepare report of Non - conformance for fabrication and construction,
• Capable to handle daily activities without supervisors instruction,
• Have better understanding of standard /code and working with QC system for specific equipment,
• Capable to conduct inspection for high level equipment and bulk materials,
• Have TOIEC score 500 is preferred.
General Qualification:
• Strong interpersonal skills and organization experience,
• Preferable Fluent in English (writing and speaking),
• Computer literate (MS office, MS Word, Ms Excel, Ms Project and related software,
• Familiar with regulation, code and standard in Oil & gas industry,
• Self – starting and motivated as well as able to work in demanding area,
• Team building mind set.
3) SR. ROTARY ENGINEERS (SRE-PETRO)
- Education : S-1 Mechanical Engineering majoring in Energy conversion
- Experience : Min. 8 years in engineering work of Oil and Gas, Petrochemical, Chemical as rotating Equipment engineer
- Sex : Male / Female
- Age : Max 40 years old
- Other Requirements :
• Good command of English (oral & written),
• Computer literacy (MS Office, MS Project, MS Word & Excel),
• Specialized knowledge and experience of techniques /skills about rotating equipment,
• Familiar with International codes and standards related to Rotating Equipment,
• Having knowledge and experience in reviewing ITB, prepare data sheet, specification, requisitioning, technical clarification/evaluations of vendor proposal, engineering, coordination between vendors and related interdisciplines, review and control of vendor s deliverables,
• Experience in leading a work group or task force.
4) HR. ADMIN (HRA)
General Qualification:
• Male/ Female, age between 25 – 30 years old,
• Education: min S-1 degree.(Psychology, Law or Business Administration),
• 3 years experience in similar position,
• Excellent knowledge in HR Admin,
• Fluent in English (writing and speaking),
• Competent in Microsoft – Office and HR Applications,
• Have a good communication skills.
Expiry date: May 18, 2010
If you would like to take the challenges, please APPLY on line
Click :
recruitment@jgc-indonesia.com or
Write the position code on top-left corner of the envelope to :
PT. JGC Indonesia
Ged. JGC, Jl. Mampang Prapatan Raya Kav. 66, Jakarta 12790
ALL APPLICANTS WILL BE TREATED IN CONFIDENTIAL
ONLY SHORT-LISTED CANDIDATES WILL BE INVITED TO JOIN OUR RECRUITMENT PROGRAM
ALL APPLICATIONS SHOULD MENTION THE RELATED DISCIPLINE CODE
1) QC ENGINEER
• Have minimum experience 6 years as QC inspector/QC Engineer in EPC project,
• Familiar with QC procedure and capable to prepare QC procedures,
• Capable to review Vendor s documents with supervision by checker,
• Capable to communication with client, vendors and subcontractors both verbal and written (draft),
• Have understanding of statulory /government (MIGAS /Depnaker) regulation and certification,
• Capable to coordinate inter-discipline and third parties,
• Capable to conduct Vendor s shop survey,
• Capable to prepare report of NCR for fabrication and construction include solutions for specific equipment,
• Have TOIEC score is preferred.
General Qualification:
• Strong interpersonal skills and organization experience,
• Preferable Fluent in English (writing and speaking),
• Computer literate (MS office, MS Word, Ms Excel, Ms Project and related software,
• Familiar with regulation, code and standard in Oil & gas industry,
• Self – starting and motivated as well as able to work in demanding area,
• Team building mind set.
2) QC INSPECTOR
• Have minimum experience 3 years as Inspector,
• Capable to prepare report of Non - conformance for fabrication and construction,
• Capable to handle daily activities without supervisors instruction,
• Have better understanding of standard /code and working with QC system for specific equipment,
• Capable to conduct inspection for high level equipment and bulk materials,
• Have TOIEC score 500 is preferred.
General Qualification:
• Strong interpersonal skills and organization experience,
• Preferable Fluent in English (writing and speaking),
• Computer literate (MS office, MS Word, Ms Excel, Ms Project and related software,
• Familiar with regulation, code and standard in Oil & gas industry,
• Self – starting and motivated as well as able to work in demanding area,
• Team building mind set.
3) SR. ROTARY ENGINEERS (SRE-PETRO)
- Education : S-1 Mechanical Engineering majoring in Energy conversion
- Experience : Min. 8 years in engineering work of Oil and Gas, Petrochemical, Chemical as rotating Equipment engineer
- Sex : Male / Female
- Age : Max 40 years old
- Other Requirements :
• Good command of English (oral & written),
• Computer literacy (MS Office, MS Project, MS Word & Excel),
• Specialized knowledge and experience of techniques /skills about rotating equipment,
• Familiar with International codes and standards related to Rotating Equipment,
• Having knowledge and experience in reviewing ITB, prepare data sheet, specification, requisitioning, technical clarification/evaluations of vendor proposal, engineering, coordination between vendors and related interdisciplines, review and control of vendor s deliverables,
• Experience in leading a work group or task force.
4) HR. ADMIN (HRA)
General Qualification:
• Male/ Female, age between 25 – 30 years old,
• Education: min S-1 degree.(Psychology, Law or Business Administration),
• 3 years experience in similar position,
• Excellent knowledge in HR Admin,
• Fluent in English (writing and speaking),
• Competent in Microsoft – Office and HR Applications,
• Have a good communication skills.
Expiry date: May 18, 2010
If you would like to take the challenges, please APPLY on line
Click :
recruitment@jgc-indonesia.com or
Write the position code on top-left corner of the envelope to :
PT. JGC Indonesia
Ged. JGC, Jl. Mampang Prapatan Raya Kav. 66, Jakarta 12790
ALL APPLICANTS WILL BE TREATED IN CONFIDENTIAL
ONLY SHORT-LISTED CANDIDATES WILL BE INVITED TO JOIN OUR RECRUITMENT PROGRAM
ALL APPLICATIONS SHOULD MENTION THE RELATED DISCIPLINE CODE
Velosi Energy Consultants; PDMS Piping Designer
PDMS Piping Designer
Velosi has been a service provider to the engineering industry globally, for more than 27 years – supporting some of the most significant Oil & Gas, Petrochemical, Power Generation, Rail, Aerospace and Construction Projects in the world. Currently Velosi Energy Consultants are looking to recruit several PDMS Piping Designers with the drive and passion to be successful in the Oil & Gas Sector.
Responsibilities:
• Preparation of isometric piping as per equipment layout, piping diagram and owner project requirements and standard by using PDMS software.
• Responsible in 3D modelling of Piping and Equipment, preparation of piping isometric drawings.
• Participate in design coordination and interfaces with other engineering discipline.
• Responsible for Designing Work in PDMS Module for Piping, Equipment, Pump, Piping and Tray supports, Nozzle orientation, Clash checking, Preparation of Structural and Fabrication Drawing.
Minimum Requirements:
• Must be an Indonesian PR or Citizen.
• Diploma in Mechanical Engineering.
• Minimum 6 years of relevant experience in Oil and Gas Industry.
• Providing leadership and mentoring for projects done in PDMS.
• Knowledge of the following modules in PDMS.
Expiry date: May 31, 2010
Only candidates that meet the minimum criteria and submit the appropriate documentation will be assessed for these roles. Interested candidates are requested to submit their resumes addressed to “Mark Brookes” with detailed working experiences, to velosi.energy@yahoo.com
Velosi has been a service provider to the engineering industry globally, for more than 27 years – supporting some of the most significant Oil & Gas, Petrochemical, Power Generation, Rail, Aerospace and Construction Projects in the world. Currently Velosi Energy Consultants are looking to recruit several PDMS Piping Designers with the drive and passion to be successful in the Oil & Gas Sector.
Responsibilities:
• Preparation of isometric piping as per equipment layout, piping diagram and owner project requirements and standard by using PDMS software.
• Responsible in 3D modelling of Piping and Equipment, preparation of piping isometric drawings.
• Participate in design coordination and interfaces with other engineering discipline.
• Responsible for Designing Work in PDMS Module for Piping, Equipment, Pump, Piping and Tray supports, Nozzle orientation, Clash checking, Preparation of Structural and Fabrication Drawing.
Minimum Requirements:
• Must be an Indonesian PR or Citizen.
• Diploma in Mechanical Engineering.
• Minimum 6 years of relevant experience in Oil and Gas Industry.
• Providing leadership and mentoring for projects done in PDMS.
• Knowledge of the following modules in PDMS.
Expiry date: May 31, 2010
Only candidates that meet the minimum criteria and submit the appropriate documentation will be assessed for these roles. Interested candidates are requested to submit their resumes addressed to “Mark Brookes” with detailed working experiences, to velosi.energy@yahoo.com
Altus Logistics; 9 positions
Altus Logistics provides value-added, integrated logistics services to the energy, mining, and infrastructure industries. Our people, their know-how, and commitment to excellence are vital ingredients in not only designing solutions but in executing them. We are committed to health, safety, and the environment-offering an integrated suite of logistics solutions that are flexible in design and responsive in implementation. We follow the basic principle to deliver the best solution for the customer with our personalized approach in first understanding a customer s objective and then responding with a tailor-made solution.
Currently we are looking for the right candidates to fill in several positions as follows:
1. Senior Process Engineer:
Task & Responsibilities:
Senior Process Engineer responsible for process design of oil and gas production facilities to create a concept, process design criteria and specifications, perform analysis and calculation processes, as well as review and implementation of government regulations, industry codes and practices. Senior Process Engineer responsibilities include working with the Senior Mechanical Engineer in choosing and making the specification. Senior Process Engineer must ideology of codes, standards and recommended practices issued by the following organizations, and shall ensure that the facilities, processes and mechanical systems are designed, fabricated and tested in accordance with codes and standards:
• American Petroleum Institute (API)
• American National Standards Institute (ANSI)
• Instruments Society of America (ISA)
• American Society of Mechanical Engineers (ASME)
• National Association of Corrosion Engineers (NACE)
Requirements:
To meet the minimum requirements in this position, the Senior Process Engineer must have a bachelor s degree in Mechanical, Process, or Petroleum Engineering, has experience of 8 (eight) years in the design process as contained in this Engineering Service Contract. Senior Process Engineer must have sufficient knowledge in applying the codes and standards, and be able to use various computer programs in applying the design.
2. Senior Mechanical Engineer:
Task & Responsibilities:
Senior Mechanical Engineer responsible for mechanical design of oil and gas production facilities to create the design concepts, criteria and mechanical specifications, conducts analysis and mechanical calculations, as well as review and implementation of the regulation - government regulation, industry code and Practices. Senior Mechanical Engineer should understand the code, standards and recommended practices issued by the following organizations, and shall ensure that the facilities, processes and mechanical systems are designed, fabricated and tested in accordance with codes and standards:
• American Petroleum Institute (API)
• American National Standards Institute (ANSI)
• National Fire Protection Association (NFPA)
• American Society of Mechanical Engineers (ASME)
• American Welding Society (AWS)
• American Manufacturers Gas Association (AGA)
• Tubular Exchanger Manufacturers Association (TEMA)
• National Association of Corrosion Engineers (NACE)
• American Society of Testing and Materials (ASTM)
Requirements:
To meet the minimum requirements in this position, Senior Mechanical Engineer must have a bachelor s degree in the field of Mechanical, Process, or Petroleum Engineering, and had experience 8 (eight) years in design and construction of oil and gas production facilities. Senior Mechanical Engineer should have sufficient knowledge in applying the codes and standards, and never responsible for the design, analysis and review mechanic at similar facilities such as those found in the Engineering Services Contract. Senior Mechanical Engineer must be able to use various computer programs in applying the design.
3. Mechanical Engineer:
Task & Responsibilities:
Mechanical Engineer will assist and conduct an independent mechanical design in accordance with directives from the Senior Mechanical Engineer.
Requirements:
Mechanical Engineer at least have a degree of education and professional qualifications are the same as the Senior Mechanical Engineer unless the experience of at least 6 (six) years in design of oil and gas production facilities.
4. Senior Electrical Engineer:
Task & Responsibilities:
Senior Electrical Engineer responsible for design of power generation, protection and distribution for medium and low voltage systems for oil and gas production facilities to choose and make the specification of equipment for power and control devices in accordance with the process and prepare the system checkout procedures and start-ups for the system in order to show that the system is functional, safe and reliable. Senior Electrical Engineer should understand the code, standards and recommended practices issued by the following organizations:
• American National Standards Institute (ANSI)
• American Petroleum Institute (API)
• National Electrical Manufacturers Association (NEMA)
• National Fire Protection Associaton (NFPA)
• National Electrical Code (NEC, NFPA 70)
• Institute of Electrical and Electronic Engineers (IEEE)
• Insulated Cable Engineer s Association (ICEA)
Requirements:
To meet the minimum requirements in this position, the Senior Electrical Engineer must have a bachelor s degree in the field of Electrical Engineering, and has the experience of eight (Eight) years in the design and construction of oil and gas production facilities. Senior Electrical Engineer should have sufficient knowledge in applying the codes and standards, and never responsible for the design, analysis and review mechanic at similar facilities, including 2 (two) or more similar projects as contained in the Contract Service Engineer. Senior Electrical Engineering must be able to use various computer programs in applying the design.
5. Senior Instrument Engineer:
Task & Responsibilities:
Senior Instrument Engineer responsible for system design and specification of equipment instruments for oil and gas production facilities. Senior Instrument Engineer shall ideology of codes, standards and recommended practices issued by the following organizations:
• American National Standards Institute (ANSI)
• American Petroleum Institute (API)
• Instruments Society of America (ISA)
• Instrument Society of Mechanical Engineers (ASME)
• National Association of Corrosion Engineers (NACE)
Requirements:
To meet the minimum requirements at this position, a Senior Instrument Engineer must have a bachelor s degree in the field of Electrical, Mechanical, Process, Chemical or Petroleum Engineering, and has experience of 3 (three) years in instrumentation design, construction or operation of oil and gas production facilities, as well as the minimum 5 (five) years total experience of instrument design and control system. Senior Instrument Engineer should have sufficient experience in applying the codes and standards, and never responsible for the design, analysis and review of instrumentation at a minimum 2 (two) similar systems such as those found in this Engineering Service Contract. Senior Instrument Engineer must be able to use various computer programs in applying the design.
6. Senior Planning & Control Engineer:
Task & Responsibilities:
Senior Planning & Control Engineer is responsible for preparing and monitoring the CPM schedule of the Project to identify resources and time required to complete EPC Project, the conduct sensitivity analysis on the CPM schedule to determine the potential for failure and the need for corrective action performed while keeping member information to management on the development of EPC Project.
Requirements:
To meet the minimum requirements in this position, the Senior Planning & Control Engineer must have a bachelor s degree in engineering or a degree related to the Project Management, and has experience of 10 (Ten) years in Planning & Progress Control on the job in general and the 6 (six) years in planning & progress control on the oil and gas production facilities. Senior Planning & Control Engineer, must have enough knowledge in industry practices, as well as ever is responsible for controlling the one or more similar projects. Senior Planning & Control Engineer must be able to use computer in controlling resources and activities for EPC Project.
7. Relaibility & Maintenance Advisor:
Task & Responsibilities:
Giving advice in scheduling work Maintenance, monitoring and ensuring the implementation of maintenance activities in accordance with the strategies, programs and procedures, as well as provide support and recommendations in an effort to improve the performance of the Company Asset (especially the production and its supporting facilities) in order to achieve the Key Performance Indicators COMPANY.
Requirements:
To meet the minimum requirements in this position, Reliability & Maintenance Advisor must have a bachelor s degree in related engineering. And have experience of at least 15 (five) years in Field Operations Maintenance and Engineering in Oil and Gas company. Reliability & Maintenance Advisor must have knowledge of Maintenance Reliability Concepts and Applications, Engineering, Maintenance, understand about the process in the oil and gas industry (from the well to sales point), familiar with the SOP COMPANY, Familiar with Engineering Technical data and drawings.
8. Designer (Multi-discipline):
Task & Responsibilities:
Designer is responsible for monitoring and managing productivity and quality of all activities in performing design drafting facilities. Designer must create an effective communications between the engineer and the drafting section. Designer should still record the status of all changes and man-hour for each image.
Requirements:
Designer must be a minimum high school graduate or equivalent training. Designer must have a minimum experience of 10 (ten) years in the engineering design where the 8 (eight) annually in the field of specialization in the design of oil and gas facilities project. He also has been a designer at least four (4) Project similar design as found in this Engineering Service Contract.
9. Draftman (Multi-discipline):
Task & Responsibilities:
Draftsman must be minimum high school graduate or equivalent training. Draftsman must have drafting experience minimum 6 (six) years in which 5 (five) years designing the project was assigned to the oil and gas facilities.
Requirements:
Draftsman also has worked minimum 4 (four) years on the drafting of specialization: the piping, electrical, instrumentation, structural, etc.
Expiry date: May 19, 2010
If you feel that your attributes match with our requirements, please send your CV by stating the position you are applying in the subject, to this email address:
id.jkt.pmi@altuslogistics.com
Currently we are looking for the right candidates to fill in several positions as follows:
1. Senior Process Engineer:
Task & Responsibilities:
Senior Process Engineer responsible for process design of oil and gas production facilities to create a concept, process design criteria and specifications, perform analysis and calculation processes, as well as review and implementation of government regulations, industry codes and practices. Senior Process Engineer responsibilities include working with the Senior Mechanical Engineer in choosing and making the specification. Senior Process Engineer must ideology of codes, standards and recommended practices issued by the following organizations, and shall ensure that the facilities, processes and mechanical systems are designed, fabricated and tested in accordance with codes and standards:
• American Petroleum Institute (API)
• American National Standards Institute (ANSI)
• Instruments Society of America (ISA)
• American Society of Mechanical Engineers (ASME)
• National Association of Corrosion Engineers (NACE)
Requirements:
To meet the minimum requirements in this position, the Senior Process Engineer must have a bachelor s degree in Mechanical, Process, or Petroleum Engineering, has experience of 8 (eight) years in the design process as contained in this Engineering Service Contract. Senior Process Engineer must have sufficient knowledge in applying the codes and standards, and be able to use various computer programs in applying the design.
2. Senior Mechanical Engineer:
Task & Responsibilities:
Senior Mechanical Engineer responsible for mechanical design of oil and gas production facilities to create the design concepts, criteria and mechanical specifications, conducts analysis and mechanical calculations, as well as review and implementation of the regulation - government regulation, industry code and Practices. Senior Mechanical Engineer should understand the code, standards and recommended practices issued by the following organizations, and shall ensure that the facilities, processes and mechanical systems are designed, fabricated and tested in accordance with codes and standards:
• American Petroleum Institute (API)
• American National Standards Institute (ANSI)
• National Fire Protection Association (NFPA)
• American Society of Mechanical Engineers (ASME)
• American Welding Society (AWS)
• American Manufacturers Gas Association (AGA)
• Tubular Exchanger Manufacturers Association (TEMA)
• National Association of Corrosion Engineers (NACE)
• American Society of Testing and Materials (ASTM)
Requirements:
To meet the minimum requirements in this position, Senior Mechanical Engineer must have a bachelor s degree in the field of Mechanical, Process, or Petroleum Engineering, and had experience 8 (eight) years in design and construction of oil and gas production facilities. Senior Mechanical Engineer should have sufficient knowledge in applying the codes and standards, and never responsible for the design, analysis and review mechanic at similar facilities such as those found in the Engineering Services Contract. Senior Mechanical Engineer must be able to use various computer programs in applying the design.
3. Mechanical Engineer:
Task & Responsibilities:
Mechanical Engineer will assist and conduct an independent mechanical design in accordance with directives from the Senior Mechanical Engineer.
Requirements:
Mechanical Engineer at least have a degree of education and professional qualifications are the same as the Senior Mechanical Engineer unless the experience of at least 6 (six) years in design of oil and gas production facilities.
4. Senior Electrical Engineer:
Task & Responsibilities:
Senior Electrical Engineer responsible for design of power generation, protection and distribution for medium and low voltage systems for oil and gas production facilities to choose and make the specification of equipment for power and control devices in accordance with the process and prepare the system checkout procedures and start-ups for the system in order to show that the system is functional, safe and reliable. Senior Electrical Engineer should understand the code, standards and recommended practices issued by the following organizations:
• American National Standards Institute (ANSI)
• American Petroleum Institute (API)
• National Electrical Manufacturers Association (NEMA)
• National Fire Protection Associaton (NFPA)
• National Electrical Code (NEC, NFPA 70)
• Institute of Electrical and Electronic Engineers (IEEE)
• Insulated Cable Engineer s Association (ICEA)
Requirements:
To meet the minimum requirements in this position, the Senior Electrical Engineer must have a bachelor s degree in the field of Electrical Engineering, and has the experience of eight (Eight) years in the design and construction of oil and gas production facilities. Senior Electrical Engineer should have sufficient knowledge in applying the codes and standards, and never responsible for the design, analysis and review mechanic at similar facilities, including 2 (two) or more similar projects as contained in the Contract Service Engineer. Senior Electrical Engineering must be able to use various computer programs in applying the design.
5. Senior Instrument Engineer:
Task & Responsibilities:
Senior Instrument Engineer responsible for system design and specification of equipment instruments for oil and gas production facilities. Senior Instrument Engineer shall ideology of codes, standards and recommended practices issued by the following organizations:
• American National Standards Institute (ANSI)
• American Petroleum Institute (API)
• Instruments Society of America (ISA)
• Instrument Society of Mechanical Engineers (ASME)
• National Association of Corrosion Engineers (NACE)
Requirements:
To meet the minimum requirements at this position, a Senior Instrument Engineer must have a bachelor s degree in the field of Electrical, Mechanical, Process, Chemical or Petroleum Engineering, and has experience of 3 (three) years in instrumentation design, construction or operation of oil and gas production facilities, as well as the minimum 5 (five) years total experience of instrument design and control system. Senior Instrument Engineer should have sufficient experience in applying the codes and standards, and never responsible for the design, analysis and review of instrumentation at a minimum 2 (two) similar systems such as those found in this Engineering Service Contract. Senior Instrument Engineer must be able to use various computer programs in applying the design.
6. Senior Planning & Control Engineer:
Task & Responsibilities:
Senior Planning & Control Engineer is responsible for preparing and monitoring the CPM schedule of the Project to identify resources and time required to complete EPC Project, the conduct sensitivity analysis on the CPM schedule to determine the potential for failure and the need for corrective action performed while keeping member information to management on the development of EPC Project.
Requirements:
To meet the minimum requirements in this position, the Senior Planning & Control Engineer must have a bachelor s degree in engineering or a degree related to the Project Management, and has experience of 10 (Ten) years in Planning & Progress Control on the job in general and the 6 (six) years in planning & progress control on the oil and gas production facilities. Senior Planning & Control Engineer, must have enough knowledge in industry practices, as well as ever is responsible for controlling the one or more similar projects. Senior Planning & Control Engineer must be able to use computer in controlling resources and activities for EPC Project.
7. Relaibility & Maintenance Advisor:
Task & Responsibilities:
Giving advice in scheduling work Maintenance, monitoring and ensuring the implementation of maintenance activities in accordance with the strategies, programs and procedures, as well as provide support and recommendations in an effort to improve the performance of the Company Asset (especially the production and its supporting facilities) in order to achieve the Key Performance Indicators COMPANY.
Requirements:
To meet the minimum requirements in this position, Reliability & Maintenance Advisor must have a bachelor s degree in related engineering. And have experience of at least 15 (five) years in Field Operations Maintenance and Engineering in Oil and Gas company. Reliability & Maintenance Advisor must have knowledge of Maintenance Reliability Concepts and Applications, Engineering, Maintenance, understand about the process in the oil and gas industry (from the well to sales point), familiar with the SOP COMPANY, Familiar with Engineering Technical data and drawings.
8. Designer (Multi-discipline):
Task & Responsibilities:
Designer is responsible for monitoring and managing productivity and quality of all activities in performing design drafting facilities. Designer must create an effective communications between the engineer and the drafting section. Designer should still record the status of all changes and man-hour for each image.
Requirements:
Designer must be a minimum high school graduate or equivalent training. Designer must have a minimum experience of 10 (ten) years in the engineering design where the 8 (eight) annually in the field of specialization in the design of oil and gas facilities project. He also has been a designer at least four (4) Project similar design as found in this Engineering Service Contract.
9. Draftman (Multi-discipline):
Task & Responsibilities:
Draftsman must be minimum high school graduate or equivalent training. Draftsman must have drafting experience minimum 6 (six) years in which 5 (five) years designing the project was assigned to the oil and gas facilities.
Requirements:
Draftsman also has worked minimum 4 (four) years on the drafting of specialization: the piping, electrical, instrumentation, structural, etc.
Expiry date: May 19, 2010
If you feel that your attributes match with our requirements, please send your CV by stating the position you are applying in the subject, to this email address:
id.jkt.pmi@altuslogistics.com
Tately N.V; Environmental Specialist (ES)
TATELY N.V., TATELY BUDONG-SUDONG N.V., ZARATEX N.V. are part of a rapidly expanding international Oil & Gas company. Together with our other associated companies, we are operators of the Palmerah, Budong-Budong and Lhokseumawe Production Sharing Contracts. We are as well partners in four non-operated PSCs.
Due to our expanding operations in iambi/South Sumatera, Mamuju (West Sulawesi) and Lhokseumawe (Aceh), we are immediately seeking a highly motivated and skilled individual to fill the positions of:
ENVIRONMENTAL SPECIALIST (ES)
Reporting to HSE Manager, this position will perform an integral role in all aspects of the initiation, formulation and implementation of environmental policies & procedures to accomplish Company comprehensive environmental management program.
The position will offer an initial 12-month contract.
Key job Responsibilities:
• As a core part of Company HSE Team, establish Environmental management policies, procedures and processes and the HSE Management System as well as be the focal point for environmental support.
• Provide guidance to the Management to ensure compliance with Environmental laws, regulation and policies to ensure the achievement of Company environmental goals.
• Interface with the Indonesian government for Environmental legislative approvals.
• Monitor and evaluate Environmental performance, including incidents and incident trends.
• Prepare regular Environmental reports for Company, Government and Joint Venture, aft related analysis.
Requirements:
• Minimum bachelor degree in Environmental Management, Forest Management, Agricultural or other relevant technical degree with 5 years of industry experience
• Experience in developing Environmental Baseline Assessment, UKL / UPL s, RKL / RPL s and AMDAL documents
• Previous experience in equivalent HSE role as well as having formal environmental qualification is an advantage
The above position requires good communication and interpersonal skills, and candidates should previously experience in working hand-in-hand collaboratively with expatriates in both an office environment and on sits locations.
Please send your comprehensive CV (in English) with a recent photograph no later than 22 nd May 2010 to:
Expiry date: May 22, 2010
TATELY N.V.
Plaza Bapindo, Menara Mandiri, 21st Floor
Jl. Jend. Sudirman Kav. 54-55, Jakarta 12190
Ore-mail us at: recruitment@tately.co.id
(quoting ES on the subject of your e-mail)
Due to our expanding operations in iambi/South Sumatera, Mamuju (West Sulawesi) and Lhokseumawe (Aceh), we are immediately seeking a highly motivated and skilled individual to fill the positions of:
ENVIRONMENTAL SPECIALIST (ES)
Reporting to HSE Manager, this position will perform an integral role in all aspects of the initiation, formulation and implementation of environmental policies & procedures to accomplish Company comprehensive environmental management program.
The position will offer an initial 12-month contract.
Key job Responsibilities:
• As a core part of Company HSE Team, establish Environmental management policies, procedures and processes and the HSE Management System as well as be the focal point for environmental support.
• Provide guidance to the Management to ensure compliance with Environmental laws, regulation and policies to ensure the achievement of Company environmental goals.
• Interface with the Indonesian government for Environmental legislative approvals.
• Monitor and evaluate Environmental performance, including incidents and incident trends.
• Prepare regular Environmental reports for Company, Government and Joint Venture, aft related analysis.
Requirements:
• Minimum bachelor degree in Environmental Management, Forest Management, Agricultural or other relevant technical degree with 5 years of industry experience
• Experience in developing Environmental Baseline Assessment, UKL / UPL s, RKL / RPL s and AMDAL documents
• Previous experience in equivalent HSE role as well as having formal environmental qualification is an advantage
The above position requires good communication and interpersonal skills, and candidates should previously experience in working hand-in-hand collaboratively with expatriates in both an office environment and on sits locations.
Please send your comprehensive CV (in English) with a recent photograph no later than 22 nd May 2010 to:
Expiry date: May 22, 2010
TATELY N.V.
Plaza Bapindo, Menara Mandiri, 21st Floor
Jl. Jend. Sudirman Kav. 54-55, Jakarta 12190
Ore-mail us at: recruitment@tately.co.id
(quoting ES on the subject of your e-mail)
A dynamic and well funded Oil and Gas Company; HR & Admin. Manager
HR & Admin. Manager
A dynamic and well funded Oil and Gas Company is seeking a talented HR & Admin Manager to join its Jakarta based operations.
Summary of Role:
Handle all human resources and administration activities; ensure timely availability of qualified personnel and implementation of human resources policies and practices and represent the Company for external relations related with human resources matters with all stakeholders.
Specific duties
1. Develop, agree and monitor HR strategy, plan, performance contract, budget and staffing levels.
2. Ensure HR policies, services and systems meet agreed standards and business needs
3. Encourage and assist the HR staff to work together as an effective team
4. Ensure HR team are developing their competencies and careers; manage the performance and personal development of direct report
5. Develop and maintain relationship with external and internal stakeholders
6. Contribute to the development and delivery of specific HR policies and programs
7. Take responsibility for achieving company s business objectives challenging safety, environment and business goals
General Qualification:
1. Education Minimum bachelor degree from any disciplines: Master degree in Law or Psychology will be an advantage.
2. Experience: Minimum 10 years of working experiences in oil and gas industry with the last 5 years spent in senior managerial position at human resources department.
3. English Language Proficiency: Good command of English communication skills in all aspect of verbal, writing as well as presentation skills
4. Computer Literacy Familiar with MS Office applications and proficient of using e-mails as daily communication means.
5. Other Qualifications: Understand Indonesian employment regulations and has strong strategic thinking orientation.
Please send your CV to recruitment@poe.co.id. 10 (ten) calendar days, starting May 8, 2010 Only short listed candidate will be contacted.
A dynamic and well funded Oil and Gas Company is seeking a talented HR & Admin Manager to join its Jakarta based operations.
Summary of Role:
Handle all human resources and administration activities; ensure timely availability of qualified personnel and implementation of human resources policies and practices and represent the Company for external relations related with human resources matters with all stakeholders.
Specific duties
1. Develop, agree and monitor HR strategy, plan, performance contract, budget and staffing levels.
2. Ensure HR policies, services and systems meet agreed standards and business needs
3. Encourage and assist the HR staff to work together as an effective team
4. Ensure HR team are developing their competencies and careers; manage the performance and personal development of direct report
5. Develop and maintain relationship with external and internal stakeholders
6. Contribute to the development and delivery of specific HR policies and programs
7. Take responsibility for achieving company s business objectives challenging safety, environment and business goals
General Qualification:
1. Education Minimum bachelor degree from any disciplines: Master degree in Law or Psychology will be an advantage.
2. Experience: Minimum 10 years of working experiences in oil and gas industry with the last 5 years spent in senior managerial position at human resources department.
3. English Language Proficiency: Good command of English communication skills in all aspect of verbal, writing as well as presentation skills
4. Computer Literacy Familiar with MS Office applications and proficient of using e-mails as daily communication means.
5. Other Qualifications: Understand Indonesian employment regulations and has strong strategic thinking orientation.
Please send your CV to recruitment@poe.co.id. 10 (ten) calendar days, starting May 8, 2010 Only short listed candidate will be contacted.
Genting Oil Kasuri Pte. Ltd; 2 positions
Genting Oil Kasuri Pte. Ltd. (GOKPL) is a members of a diversified Group which is listed on the Kuala Lumpur Stock Exchange, Malaysia.
The Group through GOKPL. is involved in several Production Sharing Contracts (PSCs) with BPMIGAS in Indonesia. in view of our significant and growing business operations in Indonesia, we seek to hire a suitably qualified candidate to fill the following position.
Engineering Manager
Responsibilities;
• Manage and coordinates for all the work activities related with all aspects of engineering;
• Ensure that the project schedules are maintained and operated within budget;
• The optimization of operational gross margin and control over expenditure, ensure the provision of sufficient plant and equipment to maintain the project schedule at optimum cost;
• Management and control of tenders and enquiries as necessary;
• Manages and coordinates for all the work activities related with all aspects of engineering;
• Perform ad-hoc tours of the project work sites to ensure that requirements are being met with regard to quality, safety and environment,
Requirements:
• Bachelor degree;
• Must have a minimum of 15 years related experience working within oil and gas industry.
• Well know both onshore and offshore operations related with all aspects of engineering.
Marine Consultant
Responsibilities:
• To assess, audit and physical Inspection to marine fleets to suit Fit for Purpose to Oil and Gas industry standard, as well as Class and Statutory requirement as per BPMIGAS standard;
• To work hand in hand with Marine warranty surveyor that assigned by Contractors of the Company for condition and suitability Inspection (if any), and or assigned by Company (if any), including but not limited to closed out inspection from Finding and Recommendation;
• To provide guidance to charter vessel, to brief the company policy as an Oil and Gas Industry of best practice and all safety aspects
• To monitor day to day marine operation and marine fleets movement, including but not limited marine movement related to weather forecast and restriction by the authorities;
• To provide Scope of Work and Marine Technical specification to related marine fleets contracts;
• To liaise with BPMIGAS, Marine Department, including liaise to Class and statutory (such at 81(1 and Directorate General of Sea Communication) of any related marine activities issue.
• To work hand in hand with any related internal department related to incoming and outgoing cargoes, and related equipment usually needed for Oil and Gas operation.
• To ensure that Company are in complying with Indonesian regulation related to marine activities In general.
• To continue monitor all chartered marine fleets are comply with company requirement throughout the contract period.
Requirements:
• Must have a minimum of 15 years experience working in marine related activities both onshore and offshore operation;
• Must have a good knowledge and comprehension of Industry standards and practices;
• Must have a good knowledge and commitment to HSE rules and practices in portable marine operations in Indonesia;
• Should be a Master Mariner (Oats-I) in Certificate of Competency, preferable with additional qualification as licensed Pilot (Mooring Master);
• Should hold a valid Certificates of Proficiency as required by STCW / ISM Code related to Oil and gas Industry.
All positions required strong proficiency in both written and spoken English, matured and pleasant personality with good interpersonal and communication skills.
A competitive remuneration package that commensurate with qualification and experience shall be offered to the successful candidate.
Interested candidates are invited to submit their applications, together with full resume/curriculum-vitae, details of current and expected remuneration and a latest photograph to the following address not later than 21st May 2010, please indicate the Position you apply on the Subject of your email or Application letter.
Expiry date: May 21, 2010
HR MANAGER
GENTING OIL KASURI PTE. LTD.
Bapindo Plaza, Citibank Tower 16th Floor
JI. Jend. Sudirman Kav. 54-55, Jakarta 12190,
or recruitment.jakarta@gentingenergy.com
Only short listed candidates will be notified.
The Group through GOKPL. is involved in several Production Sharing Contracts (PSCs) with BPMIGAS in Indonesia. in view of our significant and growing business operations in Indonesia, we seek to hire a suitably qualified candidate to fill the following position.
Engineering Manager
Responsibilities;
• Manage and coordinates for all the work activities related with all aspects of engineering;
• Ensure that the project schedules are maintained and operated within budget;
• The optimization of operational gross margin and control over expenditure, ensure the provision of sufficient plant and equipment to maintain the project schedule at optimum cost;
• Management and control of tenders and enquiries as necessary;
• Manages and coordinates for all the work activities related with all aspects of engineering;
• Perform ad-hoc tours of the project work sites to ensure that requirements are being met with regard to quality, safety and environment,
Requirements:
• Bachelor degree;
• Must have a minimum of 15 years related experience working within oil and gas industry.
• Well know both onshore and offshore operations related with all aspects of engineering.
Marine Consultant
Responsibilities:
• To assess, audit and physical Inspection to marine fleets to suit Fit for Purpose to Oil and Gas industry standard, as well as Class and Statutory requirement as per BPMIGAS standard;
• To work hand in hand with Marine warranty surveyor that assigned by Contractors of the Company for condition and suitability Inspection (if any), and or assigned by Company (if any), including but not limited to closed out inspection from Finding and Recommendation;
• To provide guidance to charter vessel, to brief the company policy as an Oil and Gas Industry of best practice and all safety aspects
• To monitor day to day marine operation and marine fleets movement, including but not limited marine movement related to weather forecast and restriction by the authorities;
• To provide Scope of Work and Marine Technical specification to related marine fleets contracts;
• To liaise with BPMIGAS, Marine Department, including liaise to Class and statutory (such at 81(1 and Directorate General of Sea Communication) of any related marine activities issue.
• To work hand in hand with any related internal department related to incoming and outgoing cargoes, and related equipment usually needed for Oil and Gas operation.
• To ensure that Company are in complying with Indonesian regulation related to marine activities In general.
• To continue monitor all chartered marine fleets are comply with company requirement throughout the contract period.
Requirements:
• Must have a minimum of 15 years experience working in marine related activities both onshore and offshore operation;
• Must have a good knowledge and comprehension of Industry standards and practices;
• Must have a good knowledge and commitment to HSE rules and practices in portable marine operations in Indonesia;
• Should be a Master Mariner (Oats-I) in Certificate of Competency, preferable with additional qualification as licensed Pilot (Mooring Master);
• Should hold a valid Certificates of Proficiency as required by STCW / ISM Code related to Oil and gas Industry.
All positions required strong proficiency in both written and spoken English, matured and pleasant personality with good interpersonal and communication skills.
A competitive remuneration package that commensurate with qualification and experience shall be offered to the successful candidate.
Interested candidates are invited to submit their applications, together with full resume/curriculum-vitae, details of current and expected remuneration and a latest photograph to the following address not later than 21st May 2010, please indicate the Position you apply on the Subject of your email or Application letter.
Expiry date: May 21, 2010
HR MANAGER
GENTING OIL KASURI PTE. LTD.
Bapindo Plaza, Citibank Tower 16th Floor
JI. Jend. Sudirman Kav. 54-55, Jakarta 12190,
or recruitment.jakarta@gentingenergy.com
Only short listed candidates will be notified.
Benchmark; various positions
Exciting Career Opportunities
With the first half of 2010 quickly coming to an end, now is the best time to look at new opportunities with some of our most prestigious global Oil and Gas Companies.
With more than 5 years experience in servicing the Oil and Gas Industry in Indonesia the team at Benchmark Recruitment is eager and well placed to assist you in your next career move.
The fast paced nature of the Oil and Gas Industry Globally has created a number of opportunities locally for exceptional professionals in various disciplines.
Production / Operation
- Production Superintendent
- HSE Manager
- Maintenance Superintendent
- HSE Officer
- Pipeline Supervisor
- Asset Integrity Engineer
- Field Engineering Supervisor
- Metering Technician
- Lab Analyst
- Shift Supervisor
- Control Room Operator
- Operator leader
- Operator Area
- Mechanical Supervisor
- Mechanical Technician
- Electrical Supervisor
- Electrical Technician
- Instrument Manager
- Instrument Technician
- DCS
Other Position
- Exploration Manager
- Sr. Geologist
- Sr. Geophysicist
- Sr. Reservoir Engineer
- Petroleum Engineer.
- Drilling Manager/Engineer
- Finance Controller
- Tax Manager
- Payroll Specialist
- HR Manager
- Legal Manager
- IT Manager
- Procurement Manager
- Logistic Superintend
- Security Manager
- Document Control
- PA/Secretary
- Contract Administrator
If you have more than 5 years experience in the Industry in any of the disciplines mentioned above, then we encourage you to apply and start the 1st step of your next career challenge.
|
Applications to:
BMRASIA
Wisma Staco 7th floor
JL Casablanca Kav 18
Jakarta 12870
mail: bmrasia@benchrecruit.com
Web: www.benchrecruit.com
Patra Niaga; various positions
Patra Niaga
A Member of Pertamina
A Member of Pertamina
Patra Niaga a member of Pertamina, as one of the mast emergad company in downstream oil & gas industry, is seeking dynamic, highly motivated and experienced professionals to fill the following positions
VP Marketing
Reported directly to Soles & Marketing Director; manages all marketing activities .i.e. strategy, pricing, promotion, customer relation, distribution channel, and marketing support. Preferably Master Degree in Marketing
Sales Area Managers
Reported to VP Sales Area; you will be based in Sumatra, Kalimantan, Sulawesi dan Papua, manages all sales activities in related area. Preferably Master Degree in Marketing.
Pricing Manager
Reported to VP Marketing; analyze, evaluate and propose pricing strategy.
Non Fuel Manager
Reported to VP Marketing; manages sales activities mostly lubricant and others.
Marketing Support Manager
Reported to VP Marketing; manages all administration aspects to support sales & marketing activities.
Purchasing & Material Management (Non Hydro) Manager
Reported to VP Corporate HR & GA; manages all purchasing process & administration for Non Hydra
Supply Chain Staff
Reported to VP Business Development; analyze, evaluate and propose supply chain strategy fresh graduates are welcome
Business Development Staff
Reported to VP Business Development; analyze, evaluate, and propose strategy in business development, fresh graduates ore welcome
Sales Representative
Reported to Sales Manager; Bachelor Degree in Chemical / Mechanical / Industrial Engineering, or Marketing Management fresh graduates are welcome.
Customer Relation and Distribution Channel Manager
Reported to VP Marketing; manages all activities related to customer services and distribution channel.
Service Excellent, Improvement & Investigation Manager
Reported directly to Operation Director; analyze, evaluate and propose operational process to meet quality & safety standards.
Own Fleet Manager
Reported to VP Fleet Management; manages all own fleet activities to meat required service level
Quality & Quantity Admin Manager
Reported to VP Depo & Storage; manages quality & quantity aspects of fuel depo & storage.
HR & GA for Operation, Manager
Reported to VP Corporate HR & GA; manages all HR matters for Operation Directorate,
General requirements
- Bachelor Degree from reputable university
- Computer literate
- Familiar with MySAP
- Proficiency in English verbal and written
- Analytic, leadership, and strategic way of thinking
- At least have 10 years experience in similar function for VP, 5 years for Manager, except for Staff & Sales Representative.
- Maximum 40 years Old For VP, 35 years old for Manager
|
Please send your resume Ms Word (Max 500 kb)
With recent photo and Expected take home pay,
not later than May 22 2010
to: recruitment.hrd@patraniaga.com
(Applied Position must be written on, the email subject)
Only short list candidates will be applications will be treated as strictly confidential.
Petrotec; 8 positions
Vacancies
Petrotec-A Qatar based Oil Gas Service Company supplying equipment and engineering support is looking for bright and self-motivated individual to work in Qatar. We require fully experienced technical personnel with good command over English proficient in the use of computer.
We offer an independent and excellent work environment along with lots of growth opportunities. All position come with company provided accommodation, yearly airfare and regular opportunities for enhancement through training.
Please email your CV with the Job Title mentioned in the subject to cv@petrotec.com.qa or cv@bidartimur.co.id
Welding Demonstrator
- A coded welder with previous experience as a trainer I certifier, ability to discuss and talk about welding system, wave patterns and complex welding technology.
- Required to set up machine demonstrate their use and train our clients.
- Minimum 2 years of experience.
Electrical Technician - Panel Board
- Should have experience in assembling of switch boards. Knowledge of wiring, bus bar work.
- Should be able to read the drawing and work independently.
- Minimum 2-3 years of experience.
- Diploma in Electrical Engineering.
Industrial Electrician.
- Hands on experience and knowledge in. HT/LT electrical machineries such as industrial elevator, EOT cranes, air compressor, hydraulic and pneumatic controls.
- Minimum 5-7 years experience in the plant machinery maintenance.
- Diploma 1111 in Electrical Engineer.
- Desirable: offshore/onshore plant shutdown maintenance exposure and flexibility to handle electro-mechanical works.
Instrument Technician
- Hands on knowledge in the field instrument installation, commissioning, repairs, maintenance, calibration of system and fully conversant with HART communication protocol.
- Minimum 5-7 years of experience in the plant of maintenance.
- Diploma/ITI in Electrical Engineer.
- Desirable: offshore/onshore plant shutdown maintenance exposure and flexibility to handle electro-mechanical Works.
Mechanical Technician
- Hands on experience in overhauling rotating equipment like Manual Valves, Pumps, Motors etc.
- Skilled to perform In-situ overhauling of mechanical equipment.
- Experienced in shutdown work.
- Minimum 4-6 years experience.
- Diploma HTI in Mechanical Engineering.
Valve Technician
- Hands on experience in overhauling Safety Relief Valve / Pressure Relief Valve, Vacuum Valve, Control Valve.
- Experienced to perform hot setting of boiler valve.
- Skilled to perform in-situ overhauling of welded valve.
- Factory certified technicians will be given preference.
- Should be capable to perform refurbishment of Manual Valves..
- Experienced in shutdown works.
- Minimum 5 years experience.
- Diploma/ITI in Mechanical Engineer.
Chemical Technician
- Experience working in industrial chemical cleanings.
- Perform air and steam blowing.
Chemical Engineer
- Preparing the Engineering Design, Completing site visits to gather required information. Develop the procedure for the operations accordingly.
- Completing the Operation, loading a working crew ensuring that the method statement is followed. Supervision of the job completion.
- Contact with the client during the operation.
- Following the QA QC directives for the operation. Chemical analysis, inspections.
- Completing a report after the service is completed.
Expiry date: May 22,
Petrotec
Fax: (+974)4410604
P.O. Box: 16069
8th Floor Toyota Tower Doha, Qatar
PT. Bidar Timur
JL. Budi Np. 20 Cawang Dewi Sartika
Jakarta 13630 Fax: 021 8014020
Petrotec-A Qatar based Oil Gas Service Company supplying equipment and engineering support is looking for bright and self-motivated individual to work in Qatar. We require fully experienced technical personnel with good command over English proficient in the use of computer.
We offer an independent and excellent work environment along with lots of growth opportunities. All position come with company provided accommodation, yearly airfare and regular opportunities for enhancement through training.
Please email your CV with the Job Title mentioned in the subject to cv@petrotec.com.qa or cv@bidartimur.co.id
Welding Demonstrator
- A coded welder with previous experience as a trainer I certifier, ability to discuss and talk about welding system, wave patterns and complex welding technology.
- Required to set up machine demonstrate their use and train our clients.
- Minimum 2 years of experience.
Electrical Technician - Panel Board
- Should have experience in assembling of switch boards. Knowledge of wiring, bus bar work.
- Should be able to read the drawing and work independently.
- Minimum 2-3 years of experience.
- Diploma in Electrical Engineering.
Industrial Electrician.
- Hands on experience and knowledge in. HT/LT electrical machineries such as industrial elevator, EOT cranes, air compressor, hydraulic and pneumatic controls.
- Minimum 5-7 years experience in the plant machinery maintenance.
- Diploma 1111 in Electrical Engineer.
- Desirable: offshore/onshore plant shutdown maintenance exposure and flexibility to handle electro-mechanical works.
Instrument Technician
- Hands on knowledge in the field instrument installation, commissioning, repairs, maintenance, calibration of system and fully conversant with HART communication protocol.
- Minimum 5-7 years of experience in the plant of maintenance.
- Diploma/ITI in Electrical Engineer.
- Desirable: offshore/onshore plant shutdown maintenance exposure and flexibility to handle electro-mechanical Works.
Mechanical Technician
- Hands on experience in overhauling rotating equipment like Manual Valves, Pumps, Motors etc.
- Skilled to perform In-situ overhauling of mechanical equipment.
- Experienced in shutdown work.
- Minimum 4-6 years experience.
- Diploma HTI in Mechanical Engineering.
Valve Technician
- Hands on experience in overhauling Safety Relief Valve / Pressure Relief Valve, Vacuum Valve, Control Valve.
- Experienced to perform hot setting of boiler valve.
- Skilled to perform in-situ overhauling of welded valve.
- Factory certified technicians will be given preference.
- Should be capable to perform refurbishment of Manual Valves..
- Experienced in shutdown works.
- Minimum 5 years experience.
- Diploma/ITI in Mechanical Engineer.
Chemical Technician
- Experience working in industrial chemical cleanings.
- Perform air and steam blowing.
Chemical Engineer
- Preparing the Engineering Design, Completing site visits to gather required information. Develop the procedure for the operations accordingly.
- Completing the Operation, loading a working crew ensuring that the method statement is followed. Supervision of the job completion.
- Contact with the client during the operation.
- Following the QA QC directives for the operation. Chemical analysis, inspections.
- Completing a report after the service is completed.
Expiry date: May 22,
Petrotec
Fax: (+974)4410604
P.O. Box: 16069
8th Floor Toyota Tower Doha, Qatar
PT. Bidar Timur
JL. Budi Np. 20 Cawang Dewi Sartika
Jakarta 13630 Fax: 021 8014020
Oil & Gas: Job Vacancy A Drilling Contractor in Coal, Mineral, Oil and Gas Industry; 4 positions
| URGENTLY REQUIRED A Drilling Contractor in Coal, Mineral, Oil and Gas Industry is currently seeking for qualified candidate as follows : 1. Workshop Supervisor Qualifications : • A minimum D3 in related subject, with 5 years experience in mechanical & fabrication (1, 2), Expiry date: May 22, 2010 Please submit your application and CV to : |
Subscribe to:
Posts (Atom)